Briggs & Stratton 18-Inch Red Battery Cable 5416K

Briggs & Stratton 18-Inch Red Battery Cable 5416K

Product description

Highlights: Color: Red Length: 18" Poly-Vinyl insulated 3/8" Lug ends Heavy duty construction Copper cable lugs are tinned coated and utilize a closed end design for corrosion protection Polyolefin heat shrink tubing applied to form a protective seal.

From the Manufacturer

Briggs and Stratton Positive Battery Cable

Share on Facebook Share on Twitter Share on Google+
Comments / reviews:
Works perfectly on our 23 year old riding lawn mower and it was easy to install! Great quality! We have a Toro with a Briggs & Stratton engine.

Fixed perfectly

Good quality. Just as described.

Arrived promptly. Package was easy to open. Works like a champ.

Good quality gauge for my riding lawnmower.

just what i needed

Perfect fit.

  • bowtiesmilelaughingblushsmileyrelaxedsmirk
Security: *
50-1/4 inch cable Length, 37-1/4 inch conduit Length, cable ends:В Z bend on each end. Replaces Mtd: 746-0957, 946-0957, fits Mtd: most push Mowers.
61 inch cable Length, 48-1/4 inch conduit Length, cable ends: Z bend on each end. Replaces Mtd: 746-04479, 946-04479, fits Mtd: most push Mowers.
65-1/2 inch cable Length, 51 inch conduit Length, cable ends: Z bend one end, spring on other. Replaces Mtd: 746-04203, 946-04203, fits Mtd: 400 and 500 Series.
Replaces Mtd:В 746-0711b,В 946-0711b, fits Mtd 900 Series. 54-1/2 inch cable Length, 51 inch conduit Length. Cable ends: T bend on one end, Z bend on the other.
Replaces Murray: 43827, 43827MA, Fits Murray: Walk behinds, 57-7/8" Cable Length, 49-1/2" Conduit Length. Cable Ends: Heavy Z bend one end, T bend on other.
p> replaces Toro: 105-1845. Fits Toro: 22 inch recycler. 68 inch cable Length, 54-1/2 inch conduit Length. Cable ends:В Z bend one end, spring on other
This shrink tubing allows you to replace worn-out shrink tubing on the cables of your Summit climbing tree stand. It’s easy to apply: Just cut away the old coating, slip the cable into the new tube, and heat to shrink it down. Your cables will look like new!
Introduction The Rollarm Kit for Arduino is designed for mass hobbyists to learn robot arm control. With the open source MCU Arduino UNO and a servo expansion board, the robot arm is easy to use and full of fun. You can control its four axes by the 4 potentiometers on the handle, as well as make
Power Pigtail (10 Pack) Designed for CCD Camera(s) or Wireless camera(s). You may connect extra Battery pack(s) with this cable or use it for CCD Camera installation. DC male 5.5mm x 2.1mm plug. Most dome- or bullet-style surveillance cameras come with a short power cable but need a patch cable to
30 Amp 50' Cordset

The SmartPlug 30 Amp Dual Configuration Cordset connects to the SmartPlug 30 Amp Boatside Inlet (BM30S) on the boatside and a typical 30 Amp twist-type outlet on the dockside. It is also the only shore power cord on the market which uses tinned copper wire