Murray Jackshaft Mandrel Housing Assembly for Mowers Using a Lawn Mower Blade Adapter 492574MA

Murray Jackshaft Mandrel Housing Assembly for Mowers Using a Lawn Mower Blade Adapter 492574MA

Product Description

Genuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.

From the Manufacturer

Genuine Murray jackshaft (mandrel) housing for all Murray riding mowers using a blade adapter.


Share on Facebook Share on Twitter Share on Google+
Comments / reviews:
I needed this for a 20 yr old riding mower. I'm a 53 yr old female, who read the reviews very carefully before I purchased it. I also ordered new bolts for the install...which are self tapping by design. I had far more trouble getting the old one off the mower, than I did putting this new one on. The reviewer who mentioned that the bolts would self tap their own threads was absolutely correct! No need for anything special to install...just normal tools you'd use to put a normal bolt in. Since this was the first time I'd done this type of repair, I learned that you only need to tighten the bolts until VERY SNUG. DO NOT OVER TIGHTEN!!! The assy is soft aluminum...tighter than "very snug" will start stripping the newly cut threads. I did pre-install the bolts first though, so the threads were already made when I actually attached it to the deck. It was much easier to put on the deck with the threads already cut.

Fit perfectly, easy to install...no complaints.

I got this so my husband could fix the lawn mower. If you are reading this then you probably know more about what this part is supposed to do than I. What I do know is that it arrived, my husband installed it and the mower works great now. It didn't work before....now it does. We are pleased and so it gets 5 stars because it does whatever it's supposed to do...

One summer in the not so distant past, I noticed the old Murry rider was cutting the grass uneven. The bearings went out on the factory mandrel on one side of the mower deck. I purchased this replacement, which was a direct fit - no modification necessary. The product comes equipped with a fitting to keep the installed bearings greased (the factory installed originals did not).

Greased up and installed on the deck, the mower cut the lawn level again...for a few months, until the other old factory mandrel suffered the same fate. I picked up another and I have had no issues with their performance or cut level. Highly recommend this product be replaced in sets.

I just put this on and had no issues with it whatsoever. It's a brand new part for much less than some of these local mower repair shops who need every stinking missing number from the mower, (even though these mowers are pretty much just alike and we all seem to know this except the people who work on them????) just to tell you "Duh, we gotta order it." Just order it yourself.

I had more difficulty getting the old Jackshaft off the mower deck than I did getting this replacement part installed, lubed and ready for service. The part was a perfect match, all the mounting holes lined up beautifully. I ended up purchasing new self-tapping mounting screws, which is why the mounting holes on the new jackshaft are not threaded. The grease fitting was of a decent quality and, if used consistently, should lead to years of trouble-free service.

I ordered this mandrel housing to replace the worn ones on my ca. 1996 Murray 12hp 38" mower. The product arrived quickly, and it fit the mower deck perfectly. The holes require either a self-tapping bolt or you can get nut and bolt sets from you local hardware store. The grease fitting is a nice addition which should hopefully lengthen the life of the mandrel.

The mandrel fit my original jackshaft and required no modification whatsoever. Thanks to Amazon!

Fit my mower perfectly and apparently is the original equipment replacement part. What more can you ask for from a repair part? I found that the bearings in one of the other 2 housing assemblies were going bad so just now ordered enough of these to rebuild my deck completely.

Perfect fit. Just what I needed

Works well on 1998 42"Scotts/Murray mower from Home Depot.

Fit like is was supposed to. Works just like the original. Have read other reviews about the installation holes not being threaded, and that they have had to tap the holes. Totally not necessary. The attachment bolts are designed to cut their own threads in the soft aluminum of the assembly.

Name:
E-Mail:
  • bowtiesmilelaughingblushsmileyrelaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypensive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
Security: *
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray ignition keys for Murray electric start ignitions.
Jackshaft Housing Assembly Replaces Murray 1001200, MTD 1001046. Fits 2001 models and up. For riding mowers. Includes shaft with grease zerk.
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray flat/backside idler pulley for Murray blade drive and motion drive idler systems. This pulley is approximately has
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray secondary blade drive belt for 46" Murray decks from 1997 to present
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray blade drive belt for 42" Murray decks from 1990 - 1996.
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray blade drive belt for 46" Murray decks from 1997 to present and 1997 -2000 Scotts model number ending in "X8"..
Murray 455962MA Mandrel housing Genuine Murray part Replaces Murray parts 455962, 55962, and 55962MA
Murray 92466MA Adapter blade Genuine Murray part Replaces Murray part 92466MA.
Product descriptionBrand New Genuine Murray Blade Adapter Kit... We are an Authorized Murray Dealer... Blade Adapter Kit Genuine Murray Part # 491926MA Genuine OEM Murray PartFrom the ManufacturerGenuine Murray blade adapter kit assembly for Murray riding mowers with splined jackshafts (mandrels).
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment. This is a cable for a front wheel drive mower that replaces Murray part numbers 1501123 and MT1501123MA.From the ManufacturerThis is a cable for a