Maxpower 331528S Mulching Blade for 21 Inch Cut MTD/Cub Cadet/Troy-Bilt Replaces 742-04100, 742-0741, 742-0741A, 942-0741, 942-0741A

Maxpower 331528S Mulching Blade for 21 Inch Cut MTD/Cub Cadet/Troy-Bilt Replaces 742-04100, 742-0741, 742-0741A, 942-0741, 942-0741A

Replacement Blade for MTD/Yardman/Cub Cadet 21-inch Cut Mulching Mower 1995 & Newer. Replaces #742-0741, 942-0741

Share on Facebook Share on Twitter Share on Google+
Comments / reviews:
I hit something last week with my push mower and bent my blade so I was in search of a new one.
I looked around and this is one of the cheapest ones I could find that looked similar to the original blade that I've had on my MTD yardman mower for the past 10 years.
My mower is a 21 inch cut self-propelled MTD yard man that mulches or bags and is fairly old. I wanted to make sure I got the correct blade for the bagging or mulching. For some reason it looked like the hole was going to be square instead of star shaped like my blade was but after reading reviews and looking at other blades I figured it would work anyway and I decided to give it a try. I was highly impressed when I received it and it was identicle to my original OEM blade. This installed onto my mower with no problems at all matched up perfectly and is super sharp.
I would definitely recommend this blade to anyone that requires this type of blade.

This is the second time I have replaced my lawn mower blade & it is never fun. Last time I had help but this time I did it solo. Getting the old blade off is a battle but I won using the usual weapons of a block of wood to keep the blade from turning, socket wrench & brute strength of a feminine nature. Putting the new blade on is just the reverse procedure. I am never sure of my ability to balance & torque the blade properly but I get the job done. The Maxpower cuts well on a variety of grass surfaces from tough dense clumps to long stemmed growth. I keep the mower height adjusted to low & take off a lot of grass when I cut the lawns. Plus the outback has various weeds mixed with the grass as with the water restrictions the weeds thrive while the grass struggles in spots so the weeds I don't pull by hand I mow down with gusto. The Maxpower blade cuts the tougher stuff in the back lot so I can't ask for more or complain. Nicely priced & speedy delivery are the icing on the cake.

Item arrived on time. I purchased this blade to replace the original for the 650 series Troy Bilt mower I own. After a few years of sharpening, the steel just didn't have enough edge left. (That, and I accidentally mowed over a few stones ...) The quality of the steel seems comparable to the original blade and it has a very nice black coating on the blade. Hopefully this week improve its longevity. This product was made in the USA, which is kind of important to me. I hope this review helps you on your research!

love having a sharp blade to wreak havoc on the weeds and crab grass i call a lawn, this beauty will tame the jungle that the moles and neighbor cats call home , put one of these on your mower , march up and down your yard (be sure to follow your wheel track) and once you're done you can even yell out "Woman! I need a cold beer" while your neighbors watch in awe and quiet envy.

Good price, good quality, made in USA. Fit just like the original and so far has very good cutting performance. I do not know if it is my imagination, but the mower seems to sweep up the clipping better than the original that cam on my Troy-Bilt Honda.

I found a mower with a damaged blade during spring cleanup week. The engine was good, and I didn't want to spend much money on it. I ordered this blade blade on Amazon and it is better than the one that was originally on the mower. It has more lift, and is of heavier material. So now, for not a lot of money, I have a good trim mower.

100 times higher quality than any other blade I've used including the OEM blade. Thick & made in America, Note: The blade has clear plastic shields on the cutting edges for protection, This is why people are saying it's dull. These come off before using.

Exact Replacement for my 5.5HP MTD 21" Mower.
Profile is the same as well. It comes very sharp.

Does a decent job on a thick Kentucky Bluegrass lawn mounted to a cheap MTD push mower. When the grass is at its prime and very thick I set the front height adjuster up a notch (front of mower cuts the grass slightly higher, then the rear cuts a second time at the desired final height) to get that extra little bit of mulching ability.

I looked around for quite a while to find a cheap replacement for my mower after bending a blade on a small stump. This blade was a good replacement for my Troy-Bilt TB130 and has worked just fine thus far.

  • bowtiesmilelaughingblushsmileyrelaxedsmirk
Security: *
For 21" Cut Deck, High Lift, Fits MTD 1997 & Newer. Also fits Bolens, Cub Cadet, Troy-Bilt, Yard-Man, Yard-Machines and White Brands. Replaces OEM No. 942-0641, 742-0621.
These high quality Maxpower Made in USA Replacement Mulching Blades for MTD/Cub Cadet 42" Cut 742-0616, 942-0616. It is a Set of 2. They are a 3 in 1 mulching style blade.
MTD 942-0741A Exact Replacement Mulching Blade, 21-inch Length. CUB CADET 300 and 900 series walk behind mowers except models with cast aluminum decks; 21-inch cut decks. MTD 1995 and newer mowers with 21-inch cut decks, Yard-Man mowers 1995 and newer and Yard Machine mowers 1997 and newer.
REPLACES OEM: Craftsman: SPM209370365, Cub Cadet: 742-04276, 742-0741, 942-0741, 942-0741A, CC-742-3032, MTD: 742-0741, 742-741, 942-0741, 942-0741-X, 942-0741A, Ranch King: 742-0741, Troy-Bilt: 742-0741, 942-0741. FITS MODELS: Cub Cadet 300 and 900 series 21" walk behinds, except models with cast
Set of two blades for a 33" cut MTD/cub cadet walk behind Mower. Replaces cub cadet 742-04154, 942-04154. Maxpower blades are made in the USA to meet or exceed OEM specifications.
MaxPower 561531 2 Blade Set for MTD/Cub Cadet 38" Cut Deck 742-0610, 942-0610 Made in USA. 3-in-1, Mulching style blade.
Set of 3 Mulching Blades for 46" Cut MTD riders 1997 and after. Fits MTD, Bolens, Cub Cadet, Troy-Bilt, Yard-Man, Yard Machines and White Brands. Replaces OEM No. 942-0644,942-0645,753-0675(set). Contains 3 total blades, 2 different lengths.
Blade to Blade Belt for MTD/Yardman Fits 42-inch Cut riders with side discharge -inchG-inch decks Aramid fiber belt Replaces MTD #754-0371A, 954-0371A Belt measures 21/32-inch x 74-inch
Replacement Blade to Blade Belt for MTD/Yardman Mowers. Replaces MTD #754-0433, 954-0433, and 754-329A
Replaces OEM No. 742-0642, 942-0642 22 Inch Length; Center Hole Adapts to 4 Point Star Proudly Made in the USA Fits MTD 1995 & Newer Replaces #7420642 22-Inch cut blade Carded