Comments about MaxPower 561739 2-Blade Mulching Set for 46 Inch Cut Poulan/Craftsman/Husqvarna Replaces 405380, 532405380, PP21011

MaxPower 561739 2-Blade Mulching Set for 46 Inch Cut Poulan/Craftsman/Husqvarna Replaces 405380, 532405380, PP21011

This is a Maxpower high quality Made in USA replacement 2 Blade Set for Poulan/Craftsman/Husqvarna 405380, PP21011, Fits 46" Cut Deck with 2 blades.

Share on Facebook Share on Twitter Share on Google+
These are replacement blades that fit some Sears/Husqvarna model lawn tractors. From the looks of them, they are OEM. This type of "lift" configuration is better at chopping up the cut grass, but is a bit more susceptible to damage from hitting objects, which I tend to do frequently in our rough lawn. At any rate, these are really the only ones that I can find which I am certain will fit. The quality of the blades is good, but I would prefer something a bit more sturdy. They arrived in good condition and reasonably sharp for immediate use.

I purchased 3 sets of these blades for my lawn guy....He has a new Husky zero turn and was complaining about the high costs of blades...So I found these here on Amazon and bought them all for the same cost as just one pair in the big box stores in town. I gifted them to him and he LOVES them. He swaps them out every few days and resharpens them quickly...3 sets will last him the whole season and greatly increase his profits.

Perfect replacement blades, with Prime, excellent service. Speedy delivery is important in the spring, when one can literally watch the grass grow. With more than two acres, at this time of year, it needs mowed twice a week and if you don't - well, no one wants snakes in their house. I think they're a thicker blade than the ones Sears Parts sells, I know they're less than half of what Sears charges.

Replaces my old 46" blade perfectly and cuts well. Only costs slightly more than sharpening the old ones (which usually leaves nicks anyway). So as long as these last at least a season, I'll buy new from now on.

Fit right on and will work nicely for mowing. This fit my Poulan Pro 46" cut riding mower. Considering the price, I will buy these again when needed, over trying to sharpen out too many nicks in the blade.

Bought them so I could continue cutting my grass (which grows extremely fast) while I was sharpening the old ones. Haven't use them yet, but judging from the sharpness, I think they'll do the job very nicely.

These worked great at an even better price. Do your research and make sure these fit your mower. I would hate for someone to leave a bad review because something didn't fit. My mower is a Craftsman YTS 3000.

Bought these blades for about half prices from a big box store. I installed them on my Husqvarna RZ4623 zero turn mower. Cant' really tell the difference from the expensive OEM brand name. I WILL buy this again and recommend to other people.

It's a great blade, but it won't fit. I didn't realize that there was 5 point star hole or 6 point star hole on these blades. I needed the 6 point hole blade. I will use this one on something else.

Seemed well made. Too bad it won't fit my mower. Just a little FYI if you have a Craftsman mower purchased in 2013 check your blade star pattern before ordering. After talking to a Sears rep the other day I found out in 2013 their mowers were made by MTD. In subsequent years and the current year, they are made by husqvarna. MTD uses 6 point star Husqvarna uses 5.

  • bowtiesmilelaughingblushsmileyrelaxedsmirk
Security: *
This assortment of Lock Nuts contains the following: 25-piece #10 by 24, 35-piece 1/4-Inch by 20, 25-piece 1/4-Inch by 28, 30-piece 5/16-Inch by 18, 25-piece 3/8-Inch by 16, and 10-piece 1/2-Inch by 13.
Replacement Idler pulley for Poulan, Husqvarna, Craftsman. Replaces OEM #194326, 532-194326. Our pulleys are Made in the USA to meet or exceed original equipment specifications.
Tecumseh air filter Replaces Tecumseh #30727 Carded
Air Filter for Tecumseh 13-17 hp Enduro OHV Engines. Replaces Tecumseh #36536.There is a lot behind the Maxpower name, as a division of the world's largest aftermarket supplier of outdoor power equipment parts and accessories, there is over 50 years' experience. There is also unparalleled quality
Spindle shaft replaces Poulan/Husqvarna/Craftsman/AYP 187291. Includes bearing with grass shield and zerk. Fits our 10-11590 spindle assembly. With Lower Bearing and Grease Zerk.
Spindle assembly replaces MTD 917-0906A/717-0906A. Fits 38'' and 42'' F deck model 600 series. Fits 38'' and 42'' F deck model 600 series
MaxPower's Premium Kevlar V-Belts are reinforced with DuPont Kevlar fiber cords for heavy duty applications and severe duty cycles. These belts feature a drier fabric cover to withstand severe clutching action, bending, or twisting. They can also support heavy loads and backside idler applications.
Replacement Spindle Assembly for Cub Cadet/MTD 618-04129B, 918-04129B. Fits 54" decks models LT1024, LT1050, SLT1554. Has grease fitting and tapered bearings.
Replacement Air Filter and Pre-Cleaner for Briggs and Stratton 15.5-17.5 HP Intek Engines. Replaces the following Briggs and Stratton filter numbers: 697153, 697014, 697634, 698083. Replaces Pre-Cleaner #697015.
.065-inch Diameter Round Trimmer Line. 1800-Foot length. Maxpower RoundCut trimmer line is made from sturdy nylon components and is great for homeowner/residential use. This trimmer line is proudly manufactured in the USA and provides consumers with a quality cutting line and an economical price.